Product Specifications
ECOTITE by Pinnacle West Inc.

Product Specifications

ECOTITE™ 2.0 is a medium-density spray polyurethane foam insulation for use in residential, commercial, industrial and institutional structures, both new and retrofit. ECOTITE™ 2.0 adheres well to all common building materials. The material itself creates a permanent air seal which further increases its value as an insulating medium. ECOTITE™ 2.0 has been tested and meets the current requirements in the national building code of Canada (NBC) as per CAN/ULC S705.1 and is currently listed by the Canadian Construction Materials Centre (CCMC) under evaluation listing #14002-L.

Key Features

  • LTTR - TYPE 2 (The Highest) provides long-term thermal resistance of 2.0 m²•K/W at 50 mm.
  • Meets and exceeds CAN/ULC S705.1-01 (Including Amendments 1 and 2) as referenced in the National Building Code of Canada.
  • Use on substrates as cold as -15°C (5°F).
  • Safe for electrical wiring, can be applied over typical electrical wiring without affecting wire coverings.
  • Safe for plumbing, can be applied over PVC (polyvinyl chloride), ABS (acrylonitrile butadiene styrene), PEX (cross-linked polyethylene), copper and steel piping systems.

Typical Applications

  • Residential, commercial, industrial and institutional building insulation.
  • Interior perimeter stud wall insulation.
  • Exterior, below grade and under slab applications.
  • Freezers & Coolers.
  • Agricultural facilities.

Long Term Thermal Resistance (LTTR) Test Method CAN/ULC 770 Measured at 5 Years

ECOTITE™ 2.0 is a TYPE 2 medium-density SPF with an exceptional R-Value of 6.0 per inch. Based on a 88.9mm (3.5”) installation.

Thickness - Mm (Inches) R-VALUE (ft²-hr-F/BTU) RSI (2.0 m²•K/W)
50.0 mm (1.97”) 11.36 2.00 Type 2 (The Highest)
50.8 mm (2.0”) 11.53 2.03
75.0 mm (2.95”) 17.26 3.04
88.9 mm (3.5”) 21.06 3.71
100 mm (3.93”) 23.84 4.20

Typical Physical Properties

The physical and performance properties of ECOTITE™ 2.0 are determined through standardized tests conducted by certified independent third-party testing laboratories.

Description Test Method Results
Core Density (lb/ft³ / kg/m³) ASTM D-1622 2.0 ± 0.1 / 32 ± 1.5
Initial Thermal Resistance, 50 mm (RSI / R-Value) ASTM C-518 RSI: 2.37 / R-Value 13.45
Tensile Strength (psi / kpa) ASTM D-1623 75 / 517
Compressive Strength (psi / kpa) ASTM D-1621 25.4 / 175
Closed-Cell Content (%) ASTM D-2856 >93
Fungi Resistance ASTM G-21 Zero Rating
Air Permeation @ 75Pa ASTM E-2178 0.0002 L/s
Water Vapor Permeance 50 mm sample ASTM E-96 41 ng/Pa.s.m²
Air Leakage (L/s/m²) ASTM E-283 0.002
Sound Transmission Class (STC) ASTM E-90 Class 33
VOC Emissions CAN/ULC S Pass (1Day)
Water Absorbtion % ASTM D-2842 0.4% PASS
Dimensional Stability % Volume Change after 28 days ASTM D-2126 0.03 % @ -29°C (-20°F)
-0.7 % @ 80°C (176°F)
0.2 % @ 70°C (158°F), 97 % RH
Flame Spread Class CAN/ULC S102 and S127 40 Tunnel
230 Corner
405 Smoke Developed

Download Product Specification Sheet

Sustainable Insulation Systems

Head Office

Address:
31897 Mercantile Way
Abbotsford, BC, Canada V2T 4C3

Telephone:
Toll Free: 1-800-901-0088
International: +1-604-854-5968
Fax: 604-854-5918

Hours of Operation:
Mon to Fri: 8:00am to 4:30pm
Pacific Time

Email:
Click Here

Shop Online

Secure online shopping
Over 45,000 parts and supplies
  • Professional Grade Products
  • Rewards Program
  • Feature Rich Content
  • Safe & Secure Shopping
  • Graco & GlasCraft Parts
  • Complete Spray Systems

Click Here to visit PUREPOLY.COM